ZK -SAMp Manuel d'utilisateur télécharger pdf (Page 17)

201 Circle Drive N, Suite 116 Piscataway, NJ 08854 Tel: 732-412-6007 Fax: 732-412-6008

www.zkaccess.com



Note: Here we use UDP broadcast mode to search the access controller. This mode cannot exceed the HUB scale. The

IP address can exceed the net segment, but must belong to the same subnet and needs to configure the gateway and IP

address in the same network segment.

(4) Click [Add to Device List] behind the device, and a dialog box will open. Enter self-defined device name, and click [OK] to

complete device addition.

(5) The default IP address of the access control panel may conflict with the IP of a device on the Internet. You can modify its IP

address: Click [Modify IP Address] behind the device and a dialog box will open. Enter the new IP address and other

parameters (Note: Must configure the gateway and IP address in the same network segment);

5.2.2 Add Network Video Recorder (For Professional Version 5.0.8 and above)

(1) In Device Type Selection interface, select Add Network Video Recorder. The following interface appears. Click [Next] and

set the server information.

IP Address: The IP address of the device.

IP Port: IP port of the device, 8000 by default.

User Name: The user name to login to the device.

Communication Password: The password to login the device.

(2) After edition, click [OK] and the new video server will display on the device list. Currently, the system only supports

Hikvision Network Video Recorder.

5.2.3 Device Maintenance

Synchronize All Data: The system will synchronize the data to the device, including door information, access control levels

(personnel information, access control time zones), anti-pass back settings, interlock settings, linkage settings, first-card

normal open settings, multi-card normal open settings, etc. Select device, click [Synchronize All Data] and click [OK] to

complete synchronization.



Note: The operation of Synchronize All Data is mainly to delete all data in the device (except event record). Download all

settings again. Please keep the net connection stable and avoid power down situations, etc. If the device is working normally,

use this function with caution. Execute it in rare user situations to avoid impact on normal use of the device.

Delete: Select device, click [Delete], and click [OK].

Edit: Click device name, or click [Edit] under “Related Operation” behind the device to open the edit interface.

For the meanings and settings of the parameters, see the relevant chapters for details. The gray items are not editable. The

device name cannot be identical to the name of another device.

Since the device type cannot be modified, if the type is wrong, the user must manually delete the device and add it again.

5.3 Device Communication Management

1. Commands Sent by Server

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Pas de commentaire

ZK -SAMp Manuel d'utilisateur Page 17